Otoflash G171
REF 644900Flash-curing device for lightcuring resins
The device can be used for the photo-polymerisation of all light-curable materials (where the curing takes place) at a wavelength range of 280-580 nm. Ideal for end curing of 3D printed dental resins. With its technical configuration, the Otoflash G171 enables short curing times. Compared to other methods this achieves a substantially better curing of the 3D printed materials, resulting in very good physical characteristics and reduced residual monomer content (inhibition layer).
In combination with our Otoflash G171 and our printing material Ortho Print UV (medical class IIa) you can produce certified occlusal splints and drilling templates.
- Dimensions of polymerisation chambers: 120 x 120 x 50 mm
- Trays for polymerization material with UVB blocker
- Power input: 250 W
- Number of light sources: 2 fl ashbulbs à 100 W
- Flash frequency: 10 fl ashes per second
- deliverable with a protective gas appliance for nitrogen (N2)
- Digital timer: adjustable from 1 to 9.999 fl ashes
- Dimensions: 310 x 310 x 140 mm, weight: 6 kg
| REF | 644900 |