Simple and clean
The used liquid can be emptied very easily by removing the inner tank. The airtight lid prevents unpleasant odors from escaping and thus improves the working environment.
Height-adjustable drainer
Thanks to the integrated height-adjustable drip device, the operator can remove the components to be cleaned easily and cleanly.
A program for every object
There are 3 washing programs available, which can be selected from the menu: Standard and intensive cleaning or the wash cycle for sensitive parts. You can clean very complex objects precisely. Gentle cleaning is suitable for sensitive parts in order not to damage the 3D prints.
Metal 3D Printer for dental applications and prototypes is an accessible way to rapid manufacturing metal parts and prototypes with complex geometries from a variety of alloys.
Simply
Robust
Open
Affordable
Fast Material Change
Plug & Play
Instant printing
ready to print in below 5 minutes (from 21% oxygen to below 1%)
Flash-curing device for lightcuring resins
The device can be used for the photo-polymerisation of all light-curable materials (where the curing takes place) at a wavelength range of 280-580 nm. Ideal for end curing of 3D printed dental resins. With its technical configuration, the Otoflash G171 enables short curing times. Compared to other methods this achieves a substantially better curing of the 3D printed materials, resulting in very good physical characteristics and reduced residual monomer content (inhibition layer).
In combination with our Otoflash G171 and our printing material Ortho Print UV (medical class IIa) you can produce certified occlusal splints and drilling templates.
Especially developed for new generations of printers with 385 nm: Light-curing resin for the manufacturing of dental models for orthodontics and prothetics.
Faster printing process due to higher output, still with the same procesion.
Light-curing resin for the manufacturing of dental gingiva masks. Permanently soft and flexible.
Perfectly combinable with working models made of HinriPrint model resins.
Light-curing resin for the production of burn-out molded parts for the dental casting technique.
The material is highly compatible: it can be used with all commercially available embedding materials.
Biocompatible light-curing resin for the manufacturing of dental impression trays. High reactivity at low viscosity.
The finished impression trays have a homogeneous surface, which significantly reduces manual reworking.
Light-curing resin for the manufacturing of dental drill guides.
Drill guides made from HinriPrint guide are dimensionally stable and biocompatible.
Especially developed for new generations of printers with 385 nm: Light-curing resin for the manufacturing of dental models for orthodontics and prothetics.
Faster printing process due to higher output, still with the same procesion.
Light-curing resin for the 3D printing of dental models.
Precise reproduction of details, maximum surface hardness and shape stability. Maximum precision in construction, feel and stability meet the high demands of model production. Opaque colour adjustment for the optical detection of surface structure, preparation margins, etc.
Colours: ivory, grey, sand
Light-curing resin
for the 3D printing of cast objects using precision casting technology.
Burns without residue in the mould, even with large volumes. Embedding is performed with phosphate-bonded standard embedding compound. Precise reproduction of the finest surface structures. Low-viscosity approach for low material consumption and more rapid cleaning. High process reliability and precision in construction. Colour: red
Light-curing, biocompatible resin for the 3D printing of base parts for orthodontic apparatuses, drilling and X-ray templates, occlusal and fixation splints.
Benefits: maximum reliability of construction process, mechanical strength, easy to polish. Breaking strength, elasticity and influence of moisture following the orthodontic standard. Validated processes for sterilization in autoclaves. Adaptation of the occlusion field, easy fixation of orthodontic wire elements and auxiliary components with FREEFORM® fixgel. Resistant to oral conditions, neutral odour and taste. Medical device Class IIa,
colour: clear-transparent
Light-curing, biocompatible resin for the 3D printing of temporary crowns & bridges.
Exceptional breaking and fl exural resistance, high abrasion resistance. Natural tooth esthetics, brilliant, translucent colours. Easy surface processing and polishing, can be characterized individually with the smartrepair® system or composites. Low viscosity for low material consumption and more rapid cleaning. Resistant to oral conditions, no odour or taste irritations, medical device Class IIa,
colours: A1, A2, A3
Light-curing resin for the 3D printing
of dental models.
Maximum surface hardness and shape stability provide an excellent mechanical strain. Faster workflow without drying process. Maximum precision in construction, feel and stability meet the high demands of model production. Optimum edge strength provides reliable models. Opaque colour adjustment for the optical detection of surface structure, preparation margins, etc. Colours: sand
Light-curing, biocompatible resin
for the 3D printing of individual impression and functional trays and base resin plates.
Low viscosity for low material consumption and more rapid cleaning. Maximum construction speed, very high dimensional stability and torsional rigidity. No mechanical reprocessing of the surface necessary. Suitable for all impression materials, neutral odour and taste, MMA-free. Medical device Class I, colour: green
Light-curing, biocompatible resin for the 3D printing of removable denture bases.
High process reliability thanks to high initial hardness following printing. Low viscosity for reduced material consumption and faster cleaning. Displays maximum mechanical flexural and tensile strength without becoming brittle. Colour stability, odorless and tasteless. MMA-free, medical device Class IIa.
Colour: pink-transparent
Light-curing resin for the 3D printing of flexible gingival masks for dental models.
For 3D reproduction of functional gingival model segments in a digital workflow in conjunction with FREEPRINT® model. Excellent elasticity and tear-resistance. Excellent dimensional stability, no shrinkage or aging, ductile even when stored over a long period. No annoying or unpleasant odors from fabricated gingival masks.
Colour: gingiva
Light-curing resin for the 3D printing
Light-curing resin for the production of denture bases. The material provides for accurate results with an outstanding dimensional stability. FotoDent® denture is MMA-free and stable of colour.