Synthetic material
An extremely hard super hard stone with a snap-set effect (long working time). You can demould the die stone after 30 minutes and work on it. Hinristone® Saphir has a very creamy flowing property with a high thixotropy and low expansion. The extraordinary colours depend on special compounds which are scanable, absolutely homogenous and free from reams.
Recommendation: crown and bridge models, implant models, master models with precious/non-precious alloys, control models.
colour: | golden brown, ivory, maize yellow, light grey | |
Water-Powder-ratio: | 20 : 100 | |
Processing time in minutes: | 6 - 7 | |
Setting time in minutes: | 10 - 12 | |
Setting expansion %: | 0,08 | |
Compressive strength, after 1 hour(MPa): | 65 | |
Compressive strength, dry (MPa) | 90 |
Natural stone
resin-reinforced
Colour:
pearl-grey, ivory, apricot, golden brown
Package size:
5 kg bag, 4x5 kg bag, 25 kg carton, 25 kg bag
Hinriplast N is a resin-reinforced, fine-flowing super hard stone for the highest technical requirements with extremely smooth surface and an unusually edge stability. Owing to the employment of again-developed resin additives now a clearly longer stability in storage is reached.
Use recommendation:
Die models, dental arches, sectioned models, master models in precious and non precious alloys and metal ceramic restorations, check models
colour: | pearl grey; ivory; apricot; golden brown | |
Water-Powder-ratio: | 20 : 100 | |
Processing time in minutes: | 7-8 | |
Setting time in minutes: | 14,0 - 16,0 | |
Setting expansion %: | 0,09 | |
Compressive strength, after 1 hour(MPa): | 60 | |
Compressive strength, dry (MPa) | 90 |
Natural stone
Colour:
golden brown, yellow, green, white
Package size:
5 kg bag, 4x5 kg bag, 25 kg carton, 25 kg bag
A thixotropic super hard stone with exceptional hardness made from highly pure natural rock with excellent edge stability, high scratch resistance and breaking strength. Minimum expansion. Especially suitable for high-quality prosthetics. Multipurpose due to its variable water/powder ratio.
Use recommendation:
Die models, dental arches, sectioned models, master models in precious and non precious alloys and metal ceramic restorations, check models
colour: | golden brown/yellow/green/white | |
Water-Powder-ratio: | 20 : 100 | |
Processing time in minutes: | 6-7 | |
Setting time in minutes: | 12,0 - 14,0 | |
Setting expansion %: | 0,09 | |
Compressive strength, after 1 hour(MPa): | 60 | |
Compressive strength, dry (MPa) | 90 |
Natural stone
Colour:
golden brown, yellow, green, white
Package size:
5 kg bag, 4x5 kg bag, 25 kg carton, 25 kg bag
A thixotropic super hard stone with exceptional hardness made from highly pure natural rock with excellent edge stability, high scratch resistance and breaking strength. Minimum expansion. Especially suitable for high-quality prosthetics. Multipurpose due to its variable water/powder ratio.
Use recommendation:
Die models, dental arches, sectioned models, master models in precious and non precious alloys and metal ceramic restorations, check models
colour: | golden brown/yellow/green/white | |
Water-Powder-ratio: | 22 : 100 | |
Processing time in minutes: | 6-7 | |
Setting time in minutes: | 12,0 - 14,0 | |
Setting expansion %: | 0,09 | |
Compressive strength, after 1 hour(MPa): | 55 | |
Compressive strength, dry (MPa) | 80 |
Natural stone
Colour:
golden brown, yellow, green, white
package size:
5 kg bag, 4x5 kg bag, 25 kg carton, 25 kg bag
A thixotropic super hard stone with exceptional hardness made from highly pure natural rock with excellent edge stability, high scratch resistance and breaking strength. Minimum expansion. Especially suitable for high-quality prosthetics. Multipurpose due to its variable water/powder ratio.
Use recommendation:
Die models, dental arches, sectioned models, master models in precious and non precious alloys and metal ceramic restorations, check models
colour: | golden brown/yellow/green/white | |
Water-Powder-ratio: | 24 : 100 | |
Processing time in minutes: | 6-7 | |
Setting time in minutes: | 12,0 - 14,0 | |
Setting expansion %: | 0,1 | |
Compressive strength, after 1 hour(MPa): | 50 | |
Compressive strength, dry (MPa) | 75 |
Natural stone
Colour:
golden brown
Package size:
5 kg bag, 4x5 kg bag, 25 kg carton, 25 kg bag
A quick-setting super hard stone for carrying out urgent repairs. This stone is also suitable for opposing and study models. Due to its quick setting time the model can be removed after 10 minutes and further work completed on it.
Use recommendation:
Die models, dental arches, sectioned models, master models in precious and non precious alloys and metal ceramic restorations, check models
colour: | golden brown | |
Water-Powder-ratio: | 20 : 100 | |
Processing time in minutes: | 3-4 | |
Setting time in minutes: | 5,0 - 6,0 | |
Setting expansion %: | 0,09 | |
Compressive strength, after 1 hour(MPa): | 55 | |
Compressive strength, dry (MPa) | 80 |
Synthetic stone
Colour:
superwhite, golden brown
Package size:
5 kg bag, 4x5 kg bag, 25 kg carton, 25 kg bag
A synthetic super hard stone with low setting expansion, edge stability and toughness. For fabricating dental arches, check models and single dies for gold and porcelain work.
Use recommendation:
Die models, dental arches, sectioned models, master models in precious and non precious alloys and metal ceramic restorations, check models
colour: | golden brown/super white | |
Water-Powder-ratio: | 20 : 100 | |
Processing time in minutes: | 5-6 | |
Setting time in minutes: | 10,0 - 12,0 | |
Setting expansion %: | 0,09 | |
Compressive strength, after 1 hour(MPa): | 60 | |
Compressive strength, dry (MPa) | 85 |
Natural stone with synthetic additives
Colour:
super white, pink
Package size:
5 kg bag, 4x5 kg bag, 25 kg carton, 25 kg bag
High compression strength and low expansion due to its composition. Models have edge stability and an excellent scratch-resistant, smooth surface. Extremely suitable for sectioned models, check models and master models.
Use recommendation:
Die models, dental arches, sectioned models, master models in precious and non precious alloys and metal ceramic restorations, check models
colour: | pink/super white | |
Water-Powder-ratio: | 23 : 100 | |
Processing time in minutes: | 5-6 | |
Setting time in minutes: | 10,0 - 12,0 | |
Setting expansion %: | 0,1 | |
Compressive strength, after 1 hour(MPa): | 45 | |
Compressive strength, dry (MPa) | 75 |
Natural stone
Colour:
peach
Package size:
5 kg bag, 22,7 kg carton
For die models, crown and bridge work. Extremely accurate due to its low expansion. Very smooth, hard surface.
Use recommendation:
Die models, dental arches, sectioned models, master models in precious and non precious alloys and metal ceramic restorations, check models
colour: | peach | |
Water-Powder-ratio: | 22 : 100 | |
Processing time in minutes: | 6-7 | |
Setting time in minutes: | 10,0 - 13,0 | |
Setting expansion %: | 0,07 | |
Compressive strength, after 1 hour(MPa): | 52 | |
Compressive strength, dry (MPa) | 75 |
for optoelectronic systems
Colour:
reddish brown, ivory
Package Size:
5 kg bag, 4x5 kg bag, 25 kg carton, 25 kg bag
powdering stone models is unnecessary with CAM-Stone N. This special model stone was developed for optoelectronic scanning. It prevents interference from reflections in defined frequency ranges.
The quick setting time allows treatment to be completed in one chairside appointment. CAM-Stone N reproduces details exactly, has edge stability and is sharply defined.
Use recommendation:
for CAD-CAM systems, die models, dental arches, sectioned models, master models in precious and non precious alloys and metal ceramic restorations, check models
colour: | ivory | |
Water-Powder-ratio: | 20 : 100 | |
Processing time in minutes: | 4 | |
Setting time in minutes: | 7 - 9 | |
Setting expansion %: | 0,06 | |
Compressive strength, after 1 hour(MPa): | 60 | |
Compressive strength, dry (MPa) | 90 |
Natural stone
Colour: white, pink
Package size:
5 kg bag, 4x5 kg bag, 25 kg carton, 25 kg bag
For basing dental arches, for overcasts and milling bases, for reline overbites and orthodontic models, for stress-free models and positioning pins exactly.
Use recommendation:
Bases for dental arches, for sectioned models, for all pin systems when using gypsum
colour: | white/pink | |
Water-Powder-ratio: | 25 : 100 | |
Processing time in minutes: | 3-4 | |
Setting time in minutes: | 6,0 - 8,0 | |
Setting expansion %: | 0,06 | |
Compressive strength, after 1 hour(MPa): | 30 | |
Compressive strength, dry (MPa) | 50 |
Natural stone
Colour:
blue, green, white, deep blue, terracotta
Package size:
5 kg bag, 4x5 kg bag, 25 kg carton, 25 kg bag
A flowable stone for basing, which can be poured from the tub directly into the base-former without vibrating. This extremely flowable special stone is suitable for basing all die and dental arch models and guarantees a bubble free base.
Use recommendation:
Bases for dental arches, for sectioned models, for all pin systems when using gypsum
colour: | blue/deep blue/green/white/terracotta | |
Water-Powder-ratio: | 23 : 100 | |
Processing time in minutes: | 5-6 | |
Setting time in minutes: | 10,0 - 12,0 | |
Setting expansion %: | 0,06 | |
Compressive strength, after 1 hour(MPa): | 50 | |
Compressive strength, dry (MPa) | 75 |